|
Window Master is a graphical application developed by a
window & door manufacturer, not a software company. Designed to be easy to
understand and fast to operate, running under Microsoft Windows. Unlike other
programs that have to be configured for each style and combination of window,
Window Master, once some basic information is configured for a particular
series, can produce quotes and cut lists for any style, size or combination with
in that series. This is particularly valuable for a T-Mullion product. A stand
alone picture window has different formulations than a two picture combination
with windows of the same size. This is because of a T-Mullion used in the
combination instead of Frame profile. The size requirements for the components
of the window will change when the T-Mullion is used. Other programs would have
to set up formulas for each and every combination because of this. Window
Master, once the initial set up is complete, is able to compensate for any
combination that uses a T-Mullion, and therefore no additional programming is
required.
1. Configuration
Window Master calculations are based on a detailed configuration of components
that make up a product. This configuration defines component deductions,
quantity and price for each series of product that a manufacturer builds.
Configuration can be maintained by the manufacturer, or with support from Window
Master if required.
Window Master is capable of calculating requirements for a T-Mullion series of
windows. It is not necessary to program all possible configurations for a
T-Mullion window. Some generic configuration is required, after which the
program can figure out any combination needed.
Click Here
to see the configuration form.
2. Quoting
Quoting is accomplished by simply clicking on pre-defined information to
identify the product to be manufactured. Window Master was designed to be able
to operate with a minimum amount of typing. Most items can be defined by simply
clicking with the mouse on items from a list.
Upon completion of adding items to a quote, the price is calculated from the
information in the configuration (unit length cost, hardware cost, labor, mark
up, etc.). Once items have been entered on a quote, they are easily manipulated.
For example, you can easily replace Low E for all items on a quote with Low E &
Argon, without re-entering the items.
Click Here to see
the Quote Form.
Click Here to see the Quote
Report.
3. Production
The information on a quote is retained, and when the customer places an order,
at the click of the mouse, the quote can be sent to production and all required
production documentation is produced (work order, cut lists, purchase orders,
labels, etc.).
After the work order is complete, it is archived where it can be reviewed or
retrieved at a later time if required.
Click Here to see
the Production List Form.
7. Pricing Information
- Window Master Initial Purchase, $17,500, including :
-Estimating and Production capability.
-Licensing for up to 3 seats.
- $2,000/ seat for 4th, 5th and 6th seat.
- $1,000/ seat for each additional seat.
-
- Support available at $95 / Hour.
- Travel, Accommodation, Local Transportation, Meals and Incidentals paid by
customer.
For additional information,
please Contact Us
|